Renovation / Guide for paint Un Peintre Pro (House painter)
Painting a room can be a daunting task with so many colours and styles of paint to choose from. Use this guide to find the right kind of paint for your needs.
The benefits of the latex paint
Most professional painters favour flat latex paints these days for most walls and ceiling jobs; they usually choose latex semi-gloss or gloss paints to paint woodwork.
Latex has a number of advantages over the older, natural oil-based and synthetic alkyd paints, which contain solvents that cause pollution.
Latex is water-based, meaning it rarely has to be thinned.
Paint brushes and any paint drips clean up easily with soap and water.
It emits almost no fumes or vapours when applied; and it dries fast.
1. Latex paint finishes
Flat paint
Flat paint is an all-purpose paint with a soft, glare-free finish that hides minor surface irregularities to produce the greatest uniformity of appearance.
It is the usual choice for ceilings, and for walls in low-traffic areas.
Eggshell paint
Eggshell paint is very versatile, in that it combines the soft finish of flat with the washability of semi-gloss.
Use it wherever you want lustrous surface without the shiny look of gloss paints.
Medium or semi-gloss paint
Medium or semi-gloss paint is highly washable.
It works well on windows and doors as well as on walls in kitchens and baths, where you want moisture resistance and washability.
And semi-gloss applies with nearly the same ease as flat and eggshell paints.
High-gloss paint
High-gloss paint has the highest lustre and resists grease and mildew.
It takes a lot of abuse and can be washed repeatedly.
Its disadvantage is a tendency to show flaws and streaks; so be extra careful in preparing the surface and in applying the paint.
2. Other specialty paints
Ceiling paint is a specialty paint that’s ultra-flat and formulated to be thicker than standard paint, in order to reduce drips and spatters. Acoustical ceiling paint is a porous paint best used on acoustical tile ceilings.
Textured paint disguises a wall’s existing irregularities by adding texture of its own.
Mildew-resistant paint is formulated for kitchens and baths; scrubbable paints are available for children’s rooms.
3. How much paint you need
How much paint you need depends on the size of the room, the condition of the wall surface and the paint’s spreading rate.
For a rough estimate of how much paint you’ll need to cover the walls, measure the total footage around the perimeter and multiply by the wall height in metres/feet.
From this subtract 1.8 square metres (20 square feet) for each door and 1.3 square metres (14 square feet) for each window.
Divide by the spreading rate (usually 90 to 120 metres, or 300 to 400 feet) per four litres (one gallon).
That’s the number of litres (gallons) you’ll need. Do a similar calculation for the ceiling by measuring the square footage and dividing by the spread rate.
4. Trim
The amount of paint needed for the trim is about one-fourth of what is required for the walls.
It will be more or less, depending on the number of windows and doors and the amount of detail trim.
5. Primer paint
Primer is a specialty paint designed to make the topcoat look better, go further and adhere better. New, unpainted drywall must always be primed.
Dark colours, heavily patched walls and walls that have previously been painted in oil-based paint, also need a primer for the topcoat to cover successfully.
Primer is manufactured in white only, but can be tinted to approximate the colour of the finish coat that will follow.
If you don’t know whether you need a primer, try the topcoat in a well-lighted area.
Allow the paint to dry, and observe how well the finish covers and whether any streaks show through.
If it doesn’t cover well, apply a primer coat.
These simple steps will help you find the right type of paint and colour to complete your project.
